ADE Accenta G3 Spécifications télécharger pdf (Page 45)

Accenta/Optima Engineer’s Manual

LED Keypad:

While in Engineer program mode, to set the Exit Mode ,

• Press [PROG] to give a choice of programs.LED’s 1,

2 and 3 are flashing.

• Select program 1, 2 or 3. If program 2 is selected,

LED 2 is ON.

• Press [6] to enter into Exit Mode edit. The Exit Mode can

now be changed.

• Enter [0, 1, 2 or 3] for required Exit Mode. Appropriate

LED is ON for selected mode (1 = disabled, 2 = timed,

3 = final door, 4 = silent timed)

NOTE: Program Mode DISABLED is not available in program 1.

• Press [RESET] three times to save change and leave menu.

[PROG]

[2]

[6]

[RESET]

[0, 1, 2 or 3]

Programs (cont’d)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Pas de commentaire

ADE Accenta G3 Spécifications Page 45